|
T
U F S E A L D S S E
R I E S
The
DS Series is used at facilities that require the most
complete seal available and are not concerned with
infringement into the trailer opening. These models are
the most commonly used in the industry. These units can
be used on doors that are (9) nine foot wide or less.
 DSS
Summary
of Features
The
DSS model is a three sided foam compression seal and
provides the best seal possible. This model should be
used when the dock height and the door height combined,
are (13) thirteen feet or less off of grade.
Architectural
Specifications (Short Form)
DSS
- Foam dock seals shall be DSS Series as manufactured by
Kelley Tufseal, W183 S8253 Racine Ave., Muskego, WI
53150, to fit door opening ______" wide by
______" high. The base cover fabric shall be
________________________; and ____________ in color. The
wear pleat fabric shall be ____________________; and
___________ in color. Wear pleat exposure shall be WP4
(4" exposure), WP8 (8" exposure) or WP16
(16" exposure). The wear face fabric shall be
__________________; and ___________ in color. This unit
shall include a compressible foam head pad.
 DSH
Summary
of Features
The
DSH model has foam compression sides with an adjustable
fabric curtain. This model should be used when the dock
height and the door height combined, are higher than
(13) thirteen feet off of grade.
Architectural
Specifications (Short Form)
DSH
- Foam dock seals shall be DSH Series as manufactured by
Kelley Tufseal, W183 S8253 Racine Ave., Muskego, WI
53150, to fit door opening ______" wide by
______" high. The base cover fabric shall be
________________________; and ____________ in color. The
wear pleat fabric shall be ____________________; and
___________ in color. Wear pleat exposure shall be WP4
(4" exposure), WP8 (8" exposure) or WP16
(16" exposure). The wear face fabric shall be
_______________; and ___________ in color. This unit
will include an adjustable head curtain.
 DSA
Summary
of Features
The
DSA model features a manually adjustable head pad that
allows positioning of the head pad along a 48"
vertical track.
Architectural
Specifications (Short Form)
DSA
- Foam dock seals shall be DSA Series as manufactured by
Kelley Tufseal, W183 S8253 Racine Ave., Muskego, WI
53150, to fit door opening ______" wide by
______" high. The base cover fabric shall be
________________________; and ____________ in color. The
wear pleat fabric shall be ____________________; and
___________ in color. Wear pleat exposure shall be WP4
(4" exposure), WP8 (8" exposure) or WP16
(16" exposure). The wear face fabric shall be
__________________; and ___________ in color. This unit
will include an adjustable head pad.
|