K E L L E Y    E O D    D O C K L E V E L E R S

When the working range of a full size, pit-style dockleveler is not needed, rely on Kelley Edge of Dock (EOD) docklevelers to service your dock equipment needs. Available in air, hydraulic and mechanical activation, all Kelley EODs provide smooth and reliable operation.

KELLEY FX® EDGE-OF-DOCK DOCKLEVELER

Summary of Features

  • Simple, ergonomic push-button operation.
  • Broad working range. Five inches above and below dock. Transition plate may be added to accommodate docks without edge channel.
  • Self-cleaning lug-type lip hinge.
  • High volume, low pressure air bag lifting mechanism. Requires no scheduled maintenance.
  • Lifting bag operates under temperature extremes of -65 to + 180 F.
  • Lifting bag with PVC coated polyester fibers retains lifting effectiveness even when punctured; can be easily repaired.
  • Lifting bag, gaskets, and fittings resistant to common chemical washdown exposure and harsh environments.
  • 10 amp fan with two-stage, single-speed, self-cleaning filter, UL- approved motor; runs off 115 volt single-phase electrical power.
  • TRIAL PROGRAM AVAILABLE

 


Architectural Specifications (Short Form)

FX edge-of-dock dockleveler to be _ 20,000 lb. or _ 30,000 lb. capacity with _ 66" or _ 72" wide ramp. Complies with standard ANSI MH14.1- 1987. Workable span to be 29" with 11 1/2" minimum lip projection beyond bumpers. Working range to be 5" above to 5" below dock level with 15" lip. Grease fittings to be provided on rear hinge tubes. To be air operated. Self-contained unit to mount to dock face without concrete pit forming. Unit to include two laminated rubber bumpers 10"x10"x4 1/2" and heavy-duty bumper blocks. Bumper face to project 17 1/2" from dock face. Surfaces to have 4-way raised lug tread plate. To be Kelley model _ FX EOD66, or _ FX EOD72 edge-of-dock as manufactured by Kelley Company, Inc.

Models

Size
Model		 Size
WxL		 Capacity* Shipping Weight
FX-EOD6620 66 x 29 20,000 570
FX-EOD6630 66 x 29 30,000 595
FX-EOD7220 72 x 29 20,000 595
FX-EOD7230 72 x 29 30,000 635
*capacity per ANSI MH14.1-1987

Operation

Dockleveler rises when NEMA 4 shielded push-button is pushed and held.
Lip automatically extends as deck section descends into trailer bed.
After loading or unloading is complete dock attendant pushes button to activate air system and raise FX EOD. Lip falls pendant, dock attendant releases button, and FX EOD is stored.
In stored position FX EOD is fully supported by dock level support.

Construction

Ramp and lip constructed of durable 50,000 psi tensile yield four way safety tread plate.
1/4" ramp with beam reinforcement.
3/8" (20,000 cap.) or 1/2" (30,000 cap.) lip plate.
Self-cleaning lug-style lip hinge.
Plated full width front and rear hinge pins.
Grease fittings on rear hinge tubes.
Air bag and fan motor attached to pan sub-assembly.
Heavy duty steel bumper blocks with laminated rubber bumpers.

Working (Service) Range

10 inches; 5" above and 5" below dock level.

Optional Features

Optional 17" lip recommended for use when servicing refrigerated vans or other vehicles with step sections at rear.
Consult factory for optional pit mount.

Warranty

2 year structural warranty.
2 year activation warranty.
1 year all other components.
(consult owner's manual for warranty details.)