Angleshelf of Puerto Rico, Inc.
Carolina Industrial Park Street A. Bldg No. 5 Carolina, Puerto Rico 00985
Tel: (787) 752-5400 - Fax: (787) 750-5015

 

Inclined & Portables

Model C Cleated Incline Belt Conveyor

The Model C handles bags, boxes, cartons, and parts. It may be set at any angle from horizontal to 45° for various uses, including floor-to-floor conveying and the transportation of materials from building to truck or box car.
  • Bed - 6-5/8" deep x 12 ga. formed bed powder painted. Standard sections come in lengths of 6', 8', & 10'
  • Belt - hardwood cleats spaced every 60". Conveyor can be supplied less cleats
  • Overall Widths: 20", 24", & 30"
  • Motor - 3/4 HP to 2 HP available based on capacity
  • Reversible
  • Capacity-up to 520 lbs.


Model RBI/SBI Floor to Floor Incline Conveyor (Roller Bed/Slider Bed)

The Model RBI & SBI are floor-to-floor incline conveyors. They are equipped with a chain driven power feeder and an adjustable double nose-over at the discharge end to insure a smooth transfer from incline to horizontal plane. The RBI conveyor, with rollers, makes higher load capacities possible. The SBI has full width galvanized pans. Inclines are easily adjusted up to 30°. These conveyors can also be used as a booster conveyor in gravity flow systems.


  • Bed - 6-1/2" deep x 12 ga. formed steel frame powder painted. Standard sections come in lengths of 4', 6', 8', & 10'
  • Overall Widths: 16", 18", 20", 22", 24", 26", 28", 30", 34", 36", 40", & 42"
  • Motor - 3/4 HP-2 HP with brake kit based on load capacity
  • Reversible
  • Center Drive (standard)
  • Capacity can range up to 1245 lbs.

 


Model BA Folding Booster Conveyor

The Model BA is ideal for stacking, loading and unloading. One lever control adjusts angle without effort. Desired angle automatically locked by power screw.

  • Bed - 4" deep x 20" wide x 12 ga. formed steel bed, which is hinged for storage purposes
  • Overall Width - 20"
  • Overall Conveyor Lengths: 10', 12', 14', 16', 20', & 22'
  • Reversible
  • Self-powered Raising Device
  • Motor - 3/4 HP (10' to 14')-1 HP (16' to 22')
  • Switch - Reversing drum with 20' power cord and plug
  • Belt Speed - 65 FPM
  • Capacity - 300 lbs. total distributed load, 150 lbs. unit load


Model PC Parts Conveyor

The Model PC can be used as a portable or permanent parts conveyor. Side guards and cleated belt easily catch small stampings, plastic parts, etc., and carry them to hoppers or drums. Flapper guard prevents parts from falling through conveyor.

  • Bed - 6-5/8" deep x 12 ga. formed steel bed with 3-1/2" high vertical guards
  • Overall Widths: 8", 10", 12", 14", 16", 20", 22", & 28"
  • Belt - 1-1/2" high molded cleats on 12" centers
  • Portable base support is tubular steel mounted on 4" dia. steel wheels. Adjustable to control conveyor height at top and bottom
  • Motor - 1/2 HP - 2 HP (Max)
  • Overhead End Drive
  • Capacity - 300 lbs. total distributed load
  • Belt Speed - 65 FPM


Model PCX Low Profile Parts Conveyor

The portable Model PCX parts conveyor can be easily positioned under punch presses and extruding machines to catch small steel, plastic, or aluminum stampings, etc. The PCX conveys them quickly up to a hopper or drum.
  • Bed - 7-1/4" deep x 12 ga. formed steel side channel with bolt-in slider bed which provides 1" high sides above the belt
  • Belt widths: 12", 18", & 24"
  • Belt - 1" high steel cleats on 12" centers
  • Belt Scraper-mounted inside conveyor bed section to clean underside of return belt
  • Portable Base Support-adjustable from 4" to 30"
  • Underside Drive
  • Motor - 1/2 HP - 1 HP (Max)
  • Belt Speed - 25 FPM
  • Capacity - 100 lbs. total distributed load


Model PCH Piano Hinge Parts Conveyor

The Model PCH parts conveyor with hinged steel belt is ideal for carrying hot, oily parts from punch presses, forging machines, etc., to drums, hoppers, or other operations. Configurations range from straight to Z type units.
  • Bed - 8-5/8" deep x 10 ga. powder painted formed steel channel.
  • Overall Widths: 10-3/8", 12-3/8, 16-3/8", 22-3/8", & 28-3/8"
  • Belt - 12 ga. metal piano hinge
  • Motor - 3/4 HP standard, 2 HP available
  • Belt Speed - 30 FPM
  • Capacity - 35 lbs. per linear foot


Model PCA Light Duty Parts Conveyor

The portable Model PCA conveyor is easily positioned in or under punch presses, injection molding machines, extruding equipment, and other machinery where small steel or aluminum stampings, plastic parts, etc. must be quickly conveyed to hoppers or drums to keep production on the move.
  • Bed - 12 ga. formed steel troughed bed with 1" high vertical sides
  • Belt Widths: 4", 6", 8", 10", 12", & 18"
  • Overhead Drive
  • Motor - 1/2 HP
  • Belt Speed - 65 FPM
  • Capacity - maximum load per linear foot of conveyor is 10 lbs.